| New
Machine Center Added (date?) |
| HyTech recently
added a new machining center with 32" Z and full 4th axis
capabilities. It allows for interfacing with state-of-the-art
CAD systems for rapid proto-typing straight from your
CAD files. We are currently using this system to give
you quicker turnaround time by running directly from customers'
PRO-E and Auto CAD files, to list just a few. |
|
| Fine
Wire Coiler Evaluation Underway (date?) |
| HyTech has
a fine wire coiler on loan for trial and evaluation. This
workcenter will allow us to meet demanding tolerances
on miniature components with wire diameters from 0.05mm
(.002") to 0.2mm (.008") for the electronic and medical
industries. |
|
| Ultrasound
Cleaning Line Added (date?) |
| HyTech has
added an ultrasonic cleaning line. This will allow us
to insure cleanliness of critical medical, automotive
and electronic components in-house. |
|
| Expanded
Forming Capabilities (date?) |
HyTech has
expanded capabilities with a large wire diameter multi-axis-forming
machine. The addition of this machine will allow us to
produce extension, torsion and double-torsion springs
and wireforms in wire diameters up to 4mm (.157").
With the success of the first machine, HyTech again expanded
capabilities with a second large wire diameter multi-axis-forming
machine. We have acquired a second large wire diameter
multi-axis forming machine to meet customer demand for
extension, torsion and double torsion springs and wireforms
with wire diameter up to 4mm (.157"). |
|
| HyTech
Springs in New Jeep (date?) |
| HyTech has
been awarded a new contract by a Tier 1 automotive supplier.
We will manufacture springs used in assemblies for the
new Jeep Commander. |
|
| Medical
Device Industry Turns to HyTech (date?) |
Due to the
company's expertise in spring manufacturing and its experience
in medical devices, HyTech has signed two new contracts
for producing high-precision medical instruments and we
have been awarded a contract with a medical device manufacturer
to produce components for biopsy devices. (need more info)
HyTech has entered into research and development program
with a leading medical device manufacturer for a new urological
device. (need more info) |
|
|
|
| November 2009 |
| HyTech begins expansion - In late October 2009 HyTech broke ground on a new 29,700-square-foot addition that will connect our existing facility with the new Controlled Environment Facility (CEF). Combining all operations under one roof will allow us to improve production flow and efficiency of operations. Contact Us to see what we can achieve for you. |
|
| October 2009 |
| HyTech has completed renovations to the building at 946 Lincoln Parkway, which now houses our new Controlled Environment Facility (CEF). The CEF contains our new Class 10000 cleanroom in addition to equipment and processes for medical device, aerospace and electronics contract manufacturing. The new facility will allow HyTech to provide additional support to our partners in the medical device industry. We will be updating our web site in the near future to detail the new processes. Contact Us to see what we can achieve for you. |
|
| June 2009 |
| HyTech adds large diameter wireforming capabilities - HyTech has added a new AIM AFM-3D-13T CNC wireformer. This new piece of equipment increases HyTech’s maximum material diameter on precision formed wire products to 9.5mm (.375”) in spring temper materials and 13mm (.512”) in low-carbon or annealed materials. Additional modules allow us to thread, turn, chamfer, drill-and-tap and swage in-line without additional secondary processes providing extremely competitive piece prices with minimal tool costs on complex wireform components. Contact Us to see what we can achieve for you. |
|
| April 2009 |
| HyTech Celebrates 25 Years of -Thanks to the loyalty of our customers, superb service from our vendors and, of course, the hard work and dedication of our skilled and talented employees, we at HyTech are proud to celebrate our 25th year of business in 2009.
HyTech turned on its first CNC spring forming machine in a small garage in 1984. What started in that small garage with 2 employees has become a company that employs over 80 people and occupies 3 facilities with over 60,000 square feet of manufacturing and warehouse space.
Our customer list, which started with a single automotive customer, now includes leaders in the aerospace, medical, automotive and electronics industries. HyTech’s ability to diversify has allowed us to stay ahead of and outlast many of our competitors.
To each of you that have played a part in our success we thank you. To those of you that are considering HyTech for your spring, wireforming and CNC machining needs we invite you to be a part of our next 25 years.
|
|
| February 2009 |
| Thanks to our Medical and Orthodontics Components Department! - A major medical device manufacturer from a California facility emailed a request at 10:00 AM for 1,000 pcs. of a mini extension spring in Ø .002 - 316 stainless steel. Thanks to our medical grade raw material stocking program, which was initiated primarily for Medical Service Manufacturers, we were able to quote, set up the process, fabricate the 1,000 pcs. and put them on a plane by 3:00 pm the same day to California. |
|
| January 2009 |
| HyTech Additions - HyTech has acquired the building located at 946 Lincoln Parkway, adjacent to our current location. The building provides 14,500 square feet of space on 3 acres and will be a great asset to HyTech. With plans to perform precision component manufacturing and assembly, new energy efficient lighting as well as a new heating and cooling system were installed. Plans also include increasing the loading dock area and creating a raw material storage area. We have put the building through these many upgrades to provide expansion capabilities in 2009 and beyond. |
|
| October 2008 |
| New 4 Axis CNC Coiler Installed - Once again, driven by customer demands, HyTech is expanding its compression spring coiling capabilities with the addition of the new state-of-the-art CNC Coiler. This machine can make compression springs of various shapes and sizes from wire diameter up to 4.5 mm (.177"). Camless operation provides quick and easy setup. Straight cut or rotating cut capabilities are standard features and ensure springs will be made burr free. Standard spring shapes are pre-programmed in the computer CPU for easy setup. The technologically advanced Vision system enables us to inspect critical spring parameters throughout production and provide immediate feedback for statistical process control (SPC) of each production run. This is an ideal process for engineering prototypes or R&D type samples with extremely competitive costs and very short lead-times. |
|
| September 2008 |
| We would like to share the following articles courtesy of Wire Forming Technology International that we found interesting. Click on the link to read about Stress Peening or Hydrogen Embrittlement of Spring Steel. |
|
| June 2008 |
| Roller Shade Springs. An industrial user contacted HyTech regarding a broken roller spring used on a piece of equipment. The OEM is not available for replacement parts, so the customer forwarded a spring to HyTech for quotation.
Roller Shade Springs are cylindrical torsion springs made with many coils. The most common application is window shades but similar springs are used in garage doors and industrial equipment. They work well in any application requiring a large angular deflection with a long shaft over which the spring can be installed.
The spring is made of .088" diameter wire, and has 239 coils. The working deflection of the spring is over 20 revolutions! An eyelet on each end allows the spring to engage its mating assembly with no portion of it exceeding the outside coil diameter. One end of the coil is tapered down so the eyelet can be fastened to the shaft it works on. The other end is left at the full OD.
HyTech "reverse engineered" the sample spring, selecting chrome silicon spring wire for longer life than the original material. The customer purchased 10 springs, some for spares.
The customer has been so pleased with the performance of the first spring that they again contacted HyTech for another size of roller shade spring that failed. We again reproduced the existing spring and shipped sooner than the customer expected.
Roller shade type springs require a spring winder that can feed long lengths of wire, a capacity not all equipment can meet. HyTech is capable of designing roller shade springs from scratch or matching your sample.
|
|
| December 2006 |
| CNC Vertical Machining Center added. This new VMC with 32" Z axis travel and full 4th axis capability, is a newer version of the machine purchased just a year ago. Ultra modern Siemens control allows for interfacing with the state-of-the-art CAD system for rapid prototyping straight from your CAD files. It will speed up your turnaround time by running directly from your PRO-E and Auto CAD files. |
|
| November 2006 |
| ISO/TS-16949:2002 certification. HyTech received the new TS16949 certification. After an extensive training and auditing process, our company received the certification, which will allow HyTech to remain as a supplier to Tier 1 manufacturers. This process-oriented system will definitely benefit HyTech's customers. |
|
| March 2006 |
| Fine wire coiler. This new, state-of-the-art work-center will increase our capability and capacity to supply fine wire diameter coils, sheaths, stylets and other wireforms manufactured from wire 0.05 mm (0.002) to 0.2 mm (0.008). This process is primarily used for medical, dental and electronic components. |
|
| February 2006 |
| Electrochemical (ECG) cut-off machine added. HyTech now offers burr free cutting of fine tubing utilizing a modern, fully programmable CNC Electrochemical grinding process. Used frequently in medical and aerospace industries, delicate, stainless steel tubing can now be cut to very close tolerances (+/- 0.002") without burr. We have the ability to radius the cut edges - both ID and OD, at the same time. |
|
| January 2006 |
| Coordinating Measuring Machine. HyTech's CMM has been retrofitted with Guadra-Check 5000 software and new readers and encoders. Utilizing Renishaw touch probe system and offering accuracy to 0.0002", this state-of-the-art machine allows HyTech to check the tolerances on particularly large parts. Any part that can fit on a 60"x 24" x 24" table can now be verified against customer's specifications. |
|
| September 2005 |
| Fine Wire Coiler Evaluation Underway. HyTech Spring and Machine has a fine wire coiler on loan for trial and evaluation. This work center will allow HyTech Spring and Machine to meet demanding tolerances on miniature components with wire diameters from 0.05mm (.002") to 0.2mm (.008") for the electronic and medical industries. |
|
| September 2005 |
| Ultrasound Cleaning Line Added. HyTech Spring and Machine has added an ultrasonic cleaning line. This will allow us to insure cleanliness of critical medical, automotive and electronic components in house. |
|
| July 2005 |
| Expanded Forming Capabilities. HyTech Spring and Machine has expanded capabilities with a large wire diameter multi-axis-forming machine. The addition of this machine will allow HyTech Spring and Machine to produce extension, torsion and double-torsion springs and wireforms in wire diameters up to 6mm. With the success of the first machine, HyTech again expanded capabilities with a second large wire diameter multi-axis-forming machine. We have acquired a second large wire diameter multi-axis forming machine to meet customer demand for extension, torsion and double torsion springs and wireforms with wire diameter up to 6mm. |
|
| May 2005 |
| Medical Device Industry Turns to HyTech. Due to the company's expertise in spring manufacturing and its experience in medical devices, HyTech Spring and Machine has signed two new contracts for producing high-precision medical instruments. HyTech has been awarded a contract with a medical device manufacturer to produce components for biopsy devices.
HyTech has entered into research and development with a leading medical device manufacturer for a new urological device.
|
|
| February 2005 |
| New Fadel Machine Center Added. HyTech recently add a Fadel Machine Center with 32" Z and full 4th axis capabilities to our machine shop. It allows for interfacing with state-of-the-art CAD systems for rapid proto-typing straight from your CAD files. We are currently using this system to give quicker turnaround time running directly from customers PRO-E and Auto CAD files to list just a few. |
|
| January 2005 |
| HyTech Springs in New Jeep HyTech Spring and Machine has been awarded a contract to produce components that will be used in assemblies for the new Jeep Commander by a Tier 1 automotive supplier. |
|
| June
2004 |
| Wireless
networking. This month we implemented a wireless
network. Now, the network can be accessed from anywhere
in the factory. PC based controllers, PDAs, and laptops
can now communicate directly with our ERP and document
management systems. |
|
| May
2004 |
| SPAM
Filters. SPAM is a huge problem for organizations
that implement their own email systems. Using the power
of PostFix email system, HyTech has joined the front lines
of SPAM blocking. We have avoided expensive third-party
solutions by combining the strength of PostFix and our
in-house expertise. |
|
| April
2004 |
| Apache
Web Server. We moved our website to our own web
host using Apache, the number one web server software
in the world. The implementation of Apache reflects our
commitment to using open source software when it makes
good business sense. Apache is free, secure, and powerful.
We plan to implement several web technologies using Apache. |
|
| March
2004 |
| Linux
and PostFix. Installing the T-1 allows us to be
free of ISPs. In fact, we have become our own ISP! By
using open source software Linux and PostFix for email,
we created the essential electronic link between our intranet
and the internet. We believe open source software has
several advantages and we will continue to leverage these
advantages over the next several months to secure our
network and provide oustanding web services to our customers. |
|
| October
2004 |
| Installation
of T-1. HyTech's need for high bandwidth internet
connectivity was satisfied this month with the installation
of a T-1 line. After analyzing the TCO and ROI, we determined
that the T-1 pays for itself in time savings and value
added services. A Cisco router and firewall provides the
secure connectivity we require. We are very excited about
the potentials this installation has. |
|
| July
2003 |
| Improvements
to website. Taking advice from our clients, we've
begun to improve our website. We are adding a better navigation
system and increasing the content of our pages. Over the
next several weeks you will find our site downloading
faster and packed with more useful information. This site
is for you so please continue to let us know how we can
improve it. |
|
| June
2003 |
| Shipping
and receiving officially moves to new warehouse.
Thanks to our loyal customer base and the hard work of
our team here at HyTech, business continues to grow even
in the rough economic times of the past two years. To
keep up with demand, shipping and receiving was relocated
to our new warehouse and room is being made in the former
warehouse for expansion of production. |
|
| May
2003 |
| Installation
of the Pervasive database engine. To take full
advantage of the new version of GainSeeker, we installed
Pervasive 2000i, the database engine used by Hertzler
for small to medium-size organizations. We noticed immediate
improvement in response time and the elimination of intermittent
database errors. |
|
| March
2003 |
| Beta
testing of Hertzler Software's GainSeeker V7.3.
HyTech Spring and Machine was chosen to be a beta test
site for version 7.3 of GainSeeker, the software used
for SPC and DMS. The new version includes additional functionality
for data collection, configuration, and statistical analysis.
|
|
| January
2003 |
| Implementation
of Adobe Acrobat is another step toward reducing
paper usage. Using Acrobat, we can create electronic reports
for our clients to be distributed via email or the web
and create in-house documentation for machine setups and
part testing. |
|
| October
2002 |
| Automation
of DMS. HyTech's Defect Management System was automated
using Hertzler Software's GainSeeker system. Once again,
HyTech eliminates a paper based process, increasing accuracy
of the data and decreasing time it takes DMS data processing.
|
|
| October
2002 |
| Installation
of of new gigabit network backbone greatly increases
our information system's speed and stability. After two
months of monitoring and analysis, we reconfigured our
network using a new Cisco 100Mb/1000Gb switch, creating
a Gigabit connection to our ERP, email, and file sharing
systems. |
|
| July
2002 |
| Material
Certs stored electronically. Moving away from paper
based processes is a goal at HyTech.This month, we implemented
a custom database application, developed by IS, that scans
and stores Material Certs. The certs can be retrieved
based on wire size, lot control number, or date of receipt.
This greatly reduces the number of steps and forms used
previously to track material for Quality Control purposes.
|
|
| May
13, 2002 |
| HyTech
featured in Convergence. Hertzler
Systems Inc.'s newsletter on quality, Convergence,
published an article featuring HyTech Spring and Machine
Corp.as their case study. Click here to read the article. |
|
| April
4, 2002 |
Predator
System installed. HyTech’s machine shop is
now using Predator
Software to automate the programming of CNC machines.
This dramatically increases the complexity of machine
parts HyTech can manufacture and dramatically decreases
the amount of time it takes to program the machines.
The software resides on a server in the machine shop office.
The server is on the LAN and communicates with the CNC
machines via RS-232. Designers and engineers save their
code on this machine. The machinist calls the program
from their control panel to run a job or saves the program
they've created or modified to the server. Predator Software
supports DNC and manages multiple machines at the same
time. |
|
| February
28, 2002 |
| Upgrade
of Virus protection. After many months of reviews,
HyTech chose Panda
Software Global Virus Insurance. While not the most
well known of the anti-virus software available, Panda
Software's technology, track record, and pricing structure
convinced us to choose Panda. Our experience has been
great, especially during the recent Klez.i epidemic. |
|
| January
31, 2002 |
Microscopic
analysis at HyTech. A new microscopic analysis
workstation allows us to increase our commitment to quality
manufacturing and customer service. Spring makers, machinists,
and engineers access the workstation to detect damage,
surface anomalies, wire quality and provide close up inspection
of precision springs.
Images are viewable in real time on a large screen TV.
Also, the video images can be captured to PC format. These
images can be shared by printing, email, or web site. |
|
| December
31, 2001 |
| Microsoft
awards HyTech. After a few months of careful auditing
and documentation, Microsoft awarded HyTech an Acknowledgment
Of Compliance. This certifies that HyTech is fully compliant
with software copyright laws. Click
here to view the certificate. |
|
| November
21, 2001 |
| Hertzler
Software Beta Testing. HyTech and Hertzler Software
concluded a month long beta testing of Hertzler's Gainseeker
SPC/DMS software, Version 3.1. The new version features
better monitoring and management of quality data, more
robust automation support, and integration of SPC and
DMS. |
|
| October
2002 |
| Automation
of DMS. HyTech's Defect Management System was automated
using Hertzler Software's
GainSeeker system. Once again, HyTech eliminates a
paper based process, increasing accuracy of the data and
decreasing time it takes DMS data processing. |
|
| September
26, 2001 |
| New
warehouse online. HyTech’s new warehouse
is online. A fiber optic cable connects two Cisco gigabit
switches. Up to an additional 24 workstations in the warehouse
can be connected to HyTech's local area network. |
|
| July
13, 2001 |
| New
web page published. We recognize the shifting trends
in business-to-business commerce on the world wide web.
Our new web page is the first phase of an aggressive campaign
to bring our services and presence to the web. Over the
next few months, we will be introducing cutting edge customer
services. We are working with our clients to develop a
site they will use. Our site will allow us to build more
collaborative and creative partnerships around the world.
|
|
| June
25, 2001 |
Implementation
of Hertzler Systems' Gainseeker SPC software. Thanks
to the new quality control system, many quality control
operations have been automated. Automating these necessary
and crucial tasks allow the operators and quality control
officers to respond immediately to quality issues. Load
cells are interfaced to personal computers connected to
a local area network. Operators check spring loads and
with a push of a button, the result is entered into a
database. Operators, supervisors, and quality managers
instantly monitor and analyze the database. Furthermore,
many trigger events are programmed into the system, alerting
operators and quality managers in real time.
As we continue to roll out the implementation, we except
to dramatically decrease rejects, narrow control limits,
and increase production levels. Thus, we will decrease
production costs while elevating the quality of our springs
and customer service. |
